[EAS] Digital endec

[Tom Taggart]

Almost as bad as a Sine remote! I would guarantee that using
the front panel would result in a bunch of errors, some
which would not emerge for months.

There are lots of strange entries on the software, they
really need to have a screen by screen explanation for the
software.  The "help" button does nothing.

For example, by trial and error figured out the "location"
box on the event programming screen has a "local area" check
box. Otherwise it appears you need to re-enter your covered
counties for each code.  Of course, that means you need to
program those counties into the "local area" box first. 

----- Original Message -----
From: Sam Roffe <sam.roffe at gmail.com>
<eas at radiolists.net>

> It sure is a whole lot easier to program the unit than
> using the front panel.
> 
> On Fri, Apr 1, 2011 at 1:48 PM, Robert Reymont
> <robert at reymont.com> wrote: >I have installed several Sage
> digital units in the last few months and find the software
> a bit difficult to learn in the beginning but easy and
> wonderful once you get the hang of it..
> 
> >Robert
> >SECC CoChair, Arizona
> 
> >At 01:26 PM 4/1/2011 -0400, you wrote:
> --
> Sam Roffe
> 
> _______________________________________________
> This is the EAS Forum Discussion List
> 
> Please invite your friends to join our Forum!
> http://lists.radiolists.net/mailman/listinfo/eas
> 
> And, remember the main page: http://eas.radiolists.net
> 
>