[BC] Harris SX-1 Help?

[Mike McCarthy]

Check the PDM generator (lowest board) and the four quad outputs with a 
  scope?  If you have no PDM, no RF out.

Do you have verified by scope RF at the PA inputs?

MM

On 6/25/2012 9:06 PM, Neal Newman wrote:
>   Hello Guys
>   I am  attempting  to restore a Harris SX-1 transmitter from the dead.
> I have it to the point where it turns on, but no RF output. No current indicated.
> I have checked every fuse in the box all test OK.. Checked all Mosfets. all tested OK
>
> However  I thought I should get
>   at #10  an indication of 100( IPA)  I get 14
> THe IPA board tests OK.
> PDM issue?
>  >
>   But still no RF Out... what am I missing??????
>   any help would be great..
>
>   Neal Newman
> East Coast Regional Engineer MRBI