[BC] temporary roof mount for STL dish.

[Mike McCarthy]

I'll call the owner tomorrow.  You will need a P/U truck or something which 
can take a 6ft. long heavy load.  I'd be hesitant to use a SUV for fear of 
tearing the carpet and proper securing for transit.

It's not far from your place either. One hour each way from your office.

Just be forewarned....it's nearly 200 lbs.  So it needs to be carefully 
handled going up to the roof from the top floor.  I'm not sure it can be 
disassembled for transit up a ladder in smaller pieces....

MM

At 11:32 PM 3/10/2009 -0400, Xmitters at aol.com wrote:
>In a message dated 3/10/2009 9:22:58 PM Central Daylight Time,
>broadcast-request at radiolists.net writes:
>
> > I know of a new un-used heavy duty 2M dish mount at a local station.  But
> > they need the block pads to secure the ballast to the mount.
> >

SNIPPED

>Mike:
>
>Hey waycool. Sounds like a great opportunity. We need to interface to discuss
>this possibility in greater detail. We may do that over lunch, or via
>Alexander G. Bell's original attempt at virtual reality; the old twisted 
>copper pair.
>
>Please let me know soon if you desire the lunch option, so that I may get an
>accurate head count.
>
>Elseways, you can try the phone option. Catch me if you can! You're it !
>
>Jeff Glass
>Northern Illinois University
>Dell 2650 Win2000 AOL 7.0