[BC] temporary roof mount for STL dish.

[Xmitters at aol.com]

In a message dated 3/10/2009 9:22:58 PM Central Daylight Time, 
broadcast-request at radiolists.net writes:

> I know of a new un-used heavy duty 2M dish mount at a local station.  But 
> they need the block pads to secure the ballast to the mount.
> 
> I'm sure I can talk the owner into loaning the mount in exchange for the 
> foot pads when you're done.  He's not using the mount and it's banded as it 
> was when it came off the truck. It's not one of my stations....
> 
> I think 8 blocks on a leg (four legs) some 6 ft. from the pole would be 
> quite sufficient for a 4' grid dish in this area.
> 
> You will need a set of 4" to 2" pipe adapters unless the 4' dish can mount 
> to a 4" pole Jeff.
> 
> MM
> 
> 

Mike:

Hey waycool. Sounds like a great opportunity. We need to interface to discuss 
this possibility in greater detail. We may do that over lunch, or via 
Alexander G. Bell's original attempt at virtual reality; the old twisted copper pair.

Please let me know soon if you desire the lunch option, so that I may get an 
accurate head count. 

Elseways, you can try the phone option. Catch me if you can! You're it !

Jeff Glass
Northern Illinois University
Dell 2650 Win2000 AOL 7.0