[BC] ENDEC PC connect prob

[Sam Roffe]

If this is a Windows box, you might go into the ports configuration in the
device manager and lower the receive and transmit buffer.  I've had to do
this a time or two to get deviced on my com port to communicate with another
serial device.

Sam 

-----Original Message-----
From: broadcast-bounces at radiolists.net
[mailto:broadcast-bounces at radiolists.net] On Behalf Of Phil Longenecker
Sent: Monday, February 19, 2007 8:09 AM
To: broadcast at radiolists.net
Subject: [BC] ENDEC PC connect prob

Decided to try out the SAGE pc program while I had a unit on the bench.
I can't get my SAGE to connect to the laptop. Using a null modem cable on
the front panel port. PC port is good on other devices. SAGE is set up for
the computer port as no device, 9600 baud. SAGE is version 5.88, DSP ver 25
and the software is version 6.1.

What am I missing?

Phil Longenecker, DoE
Milwaukee Radio Group
414.349.4130
_______________________________________________

The BROADCAST [BC] list is sponsored by SystemsStore On-Line Sales
Cable-Connectors-Blocks-Racks-Wire Management-Test Gear-Tools and More! 
www.SystemsStore.com       Tel: 407-656-3719    Sales at SystemsStore.com


--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.441 / Virus Database: 268.17.39/687 - Release Date: 2/14/2007
4:17 PM
 

-- 
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.441 / Virus Database: 268.17.39/687 - Release Date: 2/14/2007
4:17 PM