[BC] ENDEC PC connect prob

[Mike McCarthy]

You need to use port 3 on the back and set the port to the ENDECSET setting 
if you are using the EDECSET program.

Also ver 6.1 software is only good with V 6.11 firmware.

MM

At 10:08 AM 2/19/2007 -0600, Phil Longenecker wrote
>Decided to try out the SAGE pc program while I had a unit on the bench.
>I can't get my SAGE to connect to the laptop. Using a null modem cable
>on the front panel port. PC port is good on other devices. SAGE is set
>up for the computer port as no device, 9600 baud. SAGE is version 5.88,
>DSP ver 25 and the software is version 6.1.
>
>What am I missing?
>
>Phil Longenecker, DoE
>Milwaukee Radio Group
>414.349.4130
>_______________________________________________
>
>The BROADCAST [BC] list is sponsored by SystemsStore On-Line Sales
>Cable-Connectors-Blocks-Racks-Wire Management-Test Gear-Tools and More!
>www.SystemsStore.com       Tel: 407-656-3719    Sales at SystemsStore.com