[BC] WLW Transmitter wiring codes???

[DHultsman5@aol.com]

In a message dated 12/30/2006 7:39:54 PM Central Standard Time,  
glen.kippel at gmail.com writes:

One  manufacturer I am quite familiar with has ALWAYS employed black wire
>  within its units. The ends are numbered at the terminals, and in some
>  cases those numbers may be printed along the length of the  wire.
>



*******************
Nearly all transmitters I have been involved with used a single color wire  
inside the boxes.  Gates used numbered wires all brown for many  years,  
Continental used all white wires laced in the same harness and no  numbereed until 
the mod eighties.  Most of the old WE and RCA's used either  lead covered or 
cotton covered black wire,  In many cases the wires were  numbered,
 
The Collins 820/830& 831 series used colored wires and white wires with  two 
color tracers so any woire could be traced in the harness by colors for many  
years.   Continental dropped that in their 816R when they ran out of  wire.
 
Dave