[BC] Harris Dexstar RS232 PAD data input

[Bernie Courtney]

you can configure the units to automatically open a TCP/IP socket when they
power on to any IP address and port number that you specify.  Then it just
passes the data that it receives on the RS232 port to the open socket.

bernie

On 12/9/06, jeff at rfproof.com <jeff at rfproof.com> wrote:

> Danny Ray Boyer suggested the Lantronix UDS-10 RS232 to TCP/IP converter
> as a solution. We do have TCP/IP cards in the Intraplex units, but still
> need serial for the RBDS. I suppose converts from TCP/IP to RS232 could be
> used, but how would such a converter differentiate what to convert.
>
> Alas, believing the 'book' bit again!
>
> Jeff.Johnson at rfproof.com,CSRE
> RFPROOF.COM
>
> > Experience of the brain trust??
>
> The Dexstar should be connected to your LAN via TCP/IP so that it can see
> the Enco server ...
> ...snip...
> ... their LAN cards to extend that to your tx site. That way you can
> forget about the serial connection and be done with it.
>
> tm
>
>
> _______________________________________________
>
> The BROADCAST [BC] list is sponsored by SystemsStore On-Line Sales
> Cable-Connectors-Blocks-Racks-Wire Management-Test Gear-Tools and More!
> www.SystemsStore.com       Tel: 407-656-3719    Sales at SystemsStore.com
>
>