[BC] AM Daytimers Leaving The Carrier On

[Gary Zocolo]

Or you could just program a Sine unit to do it. I know a daytime station 
with a CH specification and their Sine unit was programmed for CH sign on, 
daytime power, PM CH operation and sign off. The entire year was programmed. 
I am not sure if they had to load monthly presets or not.

Gary Zocolo
Nashville

----- Original Message ----- 
From: "Glen Kippel" <glen.kippel at gmail.com>
To: "Broadcasters' Mailing List" <broadcast at radiolists.net>
Sent: Monday, December 04, 2006 6:26 PM
Subject: Re: [BC] AM Daytimers Leaving The Carrier On


> On 12/4/06, Mark Durenberger <Mark4 at durenberger.com> wrote:
>>
>> I think you're forgetting that a lot of such stations don't have anyone 
>> in
>> the building...and they haven't figured out a way to have the automation
>> turn off the carrier :-))
>
>
> ---------------
>
> Maybe they are using El-Cheapo Systems automation, but "coffee-pot 
> outputs"
> have been available on autiomation systems for at least 30 years.  They 
> can
> play the signoff announcement ant dump the carrier.  Oh, the studio and
> transmitter are not co-located?  A Burk ARC-16 with the studio box would
> handle that quite nicely.
> _______________________________________________
>
> The BROADCAST [BC] list is sponsored by SystemsStore On-Line Sales
> Cable-Connectors-Blocks-Racks-Wire Management-Test Gear-Tools and More! 
> www.SystemsStore.com       Tel: 407-656-3719    Sales at SystemsStore.com
>
>