[BC] Padding down a sat receiver input

[Gary Glaenzer]

or better yet, use a 0-loss amplifier splitter, that way the amp-splitter
provides the LNB power and you can pad individual receivers down as needed

BTW, too much level into a StarGuide III will make it 'slow' to change
providers

Gary

----- Original Message ----- 
From: "Milton R. Holladay Jr." <miltron at mindspring.com>

> Just add in enough cheap coax to give the loss you need
> .....................lol
> M
> ----- Original Message -----
> From: "radioranger" <radioranger at comcast.net>
>
> > I just installed a new satellite receiver from Dial Global.  They
> recommend
> > that the signal level not exceed 60 on the front panel meter, and I'm
> > getting a reading of 70.  The EbNo figure is 11.5.
>
>