[BC] "live" feeds
DHultsman5 at aol.com
DHultsman5 at aol.com
Mon May 5 08:22:15 CDT 2008
In a message dated 5/2/2008 12:52:52 PM Central Daylight Time,
dpuopolo at usa.net writes:
With two pairs you can do some pretty sexy things. You can send stereo from
the remote. You can simplex a mono feedback/intercom audio channel by using
the center taps of the four windings connecting to the lines (and using two
more transformers). Finally, you can simplex an order wire between the mono
line and ground. THEN you can diode steer the relays. Five things, all on two
pairs!
-D
*************************************
For many years in the early days of "remote control" Continental
Electronics manufactured several models of transmitter remote control units. Many of
the first 50 kW. transmitter sites that were remote controlled used the
Continental remote controls.
All of the units were based on using two d.c. pairs, + & - polarities and
differential d.c. voltage levels. It was amazing how many control combinations
they were able to come up with using voltage differentals and now using
steppers as other companies did to change channels.
However many companies used the same procedured during that time period to
get as many functions out of a couple of pairs as possible.
Probably many of you younger guys don't realize that non-d remote control
for AM or FM wasn't authorized until about 1954. If you had a 250 Watt AM
station there was a first class licensee at the transmitter whenever it was on
the air. Also same applied to FM.
Dave Hultsman
Continental Electronics
**************Wondering what's for Dinner Tonight? Get new twists on family
favorites at AOL Food.
(http://food.aol.com/dinner-tonight?NCID=aolfod00030000000001)
More information about the Broadcast
mailing list