[Tech-Assist] STL problem now critical

[Ronald J. Dot'o Sr.]

I installed a new 950 STL and had a vswr problem.  It turned out the jumper
from the hard line to the antenna was RG-11 (75 ohms) about 2 1/2' long
causing the reflected and some strange readings.  Everything smoothed out
when I put in a RG-213 jumper.

Ron D

> If I don't find the RF feed issue as the problem, what you suggest is my
> next step. Wattmeter and dummy load at the top of both towers, feed a
> transmitter into the bottom, and measure power out at the coax and SWR
> into the antennas.
>
> --
> Jerry Mathis
>

 a silly message about notifying senders was replaced with this silly message