[EAS] Attention signal on an RMT

[Alan Alsobrook]

The controlling factor for an RMT is 11.61(a)(1), which specifically 
includes the Attention Signal as a required element of the RMT.

If there's no attention signal then it's just an RWT sent with the wrong 
header code.

11.61   Tests of EAS procedures.

(a) EAS Participants shall conduct tests at regular intervals, as 
specified in paragraphs (a)(1) and (a)(2) of this section. Additional 
tests may be performed anytime. EAS activations and special tests may be 
performed in lieu of required tests as specified in paragraph (a)(4) of 
this section.

(1) Required Monthly Tests of the EAS header codes, Attention Signal, 
Test Script and EOM code.

On 3/30/2017 7:05 AM, Mike McCarthy wrote:
> There's a bit of a contradiction  11.51(a) says yes, while 11.51(b) says
> not necessarily.
>

-- 
Alan Alsobrook CSRE AMD
aalso at bellsouth.net