[EAS] Clarification

[Bob Tarsio]

Message: 1
From: Edwin Bukont <ebukont at msn.com>
Content-Type: text/plain; charset="iso-8859-1"
 
Brains
 
I need to better understand how CAP compliance is attained in view of
the rule that each station has to have a Enc/Dec.
 
It appears that if you have an Sage box, and those are essentially one
per station, that I have to replace the box to be compliant?  Is it
possible to externally adapt a single CAP device to provide connectivity
to two Sage units?
 
Thanks
 
Edwin Bukont CSRE, DRB, CBNT 
E2 Technical Services LLC
Tech-Knowledgy for Hire
V- 240.417.2475; F- 240.368.1265
 
Ed:
 
You can also purchase one of our GPM-300 audio matrix switchers which is
designed to directly interface to the Sage Endec encoder. The Sage unit
issues a serial command set to command our switcher to switch from
program stream to EAS output from the generator. Our unit will allow you
to simultaneously switch up to 3 streams with the Sage command set and
up to 5 with the DASDEC command set. Both companies use our switcher
protocol for serial interface. Our units can be configured for analog
and/or digital audio interface. 
 
Regards,
 
Bob Tarsio
President
 
www.broadcast-devices.com <http://www.broadcast-devices.com/>