[BC] 66b3-50 Punch Blocks

[Mark Croom]

The work fine but are not cat5 compliant.
You likely have used block syndrome as you suspect.
Mark
MN
On Jul 25, 2014 9:59 AM, "Kevin Kidd" <kkbroadcastengineering at gmail.com> wrote:
>Hi all,

>Can someone confirm for me that the 66b3 blocks work OK with typical Cat5 wire or not?  I am sure that I have used this combination before but don't recall for sure.

>My assistant installed a new console last week and had minor problems with a few punches of the console wiring.  At least one of the punch blocks had been used with the old console and we suspect that it was just a case of used block syndrome but wanted to verify that others had used 66b3 blocks with typical Cat5.

>Kevin C. Kidd, CSRE/AMD
>AM Ground Systems Company  -  WD4RAT
>kkidd at kkbc.com  --  866-22-RADIO -- 866-227-2346
>www.amgroundsystems.com

>~______________________________________________________________________~
>If you like Radio History, you will enjoy the Oldradio Project:
>                http://www.oldradio.com