[BC] A mad scramble for the deadline?

[Bruce Potterton]

If you use the web interface.  You first download and install the
ENDECSetD.  Then open the web interface. Down load the x.88 firm ware.
In the web interface click on upload firmware.   Point it to file
location and then clik the upload button.  Everything happens
automatically from there, your settings will be saved/transferred to the
new firmware.   Read the release notes for version 88 also found on the
sage website.

It worked like a champ for me.  It took me longer to read the release
notes than to do the update.   

One note: if you are running your air-chain thru the sage box the audio
will be interrupted for about 1.5 seconds when the ENDEC reboots. 

Bruce Potterton

-----Original Message-----

 On Behalf Of
donroden at hiwaay.net

OK...... hold my hand..

I've downloaded the zip file and extracted everything.

What steps  ( in order ) do I do now ?

Will I lose all the current data ( presets ect ) that is on the target
SAGE boxes ?

When I open endecD and connect to my ENDECS, what next ??

Do I save current configuration first ?

Thanks

Don R

Quoting Alex Hartman <goober at goobe.net>:

> All,
>
> I've created a mirror for the files needed on the Blue ENDEC machines 
> for the 88.x file including a copy of endecsetd.msi installer in the 
> Zip file.
>
> http://www.goobe.net/sage/Sage-Digital-CAP-Update.zip
> md5sum for the paranoid: 309bf73676842671875823ec6f620ba8
>
> Just don't look at the website, it's horribly outdated and i whipped 
> it up in notepad about 7 years ago. I just use it for the email these 
> days. ;)
>
> Be nice, i only have 12Mbit of upload bandwidth, but i should be able 
> to hold up to all you hooligans just fine.
>
> --
> Alex Hartman
>

~_________________________________________________________________~
If you have not subscribed to the one-time-a-week BDR Newsletter, you
are missing some good material. It only takes 30 seconds: 
http://lists.theBDR.net/mailman/listinfo/bdr