[BC] recommended fluxes for silver soldering groundsystem/radials?

[Cowboy]

On Wednesday 21 April 2010 09:34:58 pm Craig Healy wrote:

> Rather than use silver solder, I welded it together.  Oxy-acetylene torch
> set to a slightly rich mixture.  I used some bare #10 ground wire for the
> welding filler with no flux. 

 I've no problem with that approach, *if* you're good enough to
 manage to melt the filler wire, and not the work too much.
 Takes a deft hand.

 I've done it, but it usually takes longer, so when time is also
 an issue.....

-- 
Cowboy

http://cowboy.cwf1.com