[BC] BE tuner and such

[Milton R. Holladay Jr.]

What about the corerection factor given in the 916A manual? Your 100 Ohm 
standatd should not read 100 on the bridge dial, but the dial reading should 
correct to 100 by the compensation chart. ( A 916 A_L_ is another story, 
though.)
M
----- Original Message ----- 
From: "Ronald J. Dot'o Sr." <ron.doto at comcast.net>
[snippage]
> [I have a GR 100 ohm precision resistor that came with the GR 916A
> bridge and measures 100 ohms exactly.  The bridge reads 100 ohms and
> 0 J with the resistor.  FWIW I have two 916A bridges and they both
> read the same.
[more snippage]