[BC] Temporary roof mount for STL dish

[Tom Bosscher]

Jeff,

    I've been using a non-penetrating sat dish mount for some 8 years 
for a 4' 950 dish. The pipe for the sat dish is 4" OD or so, so I bought 
some Andrews clamps to go to a 2" rigid pipe. Works fine, hasn't sailed 
over the roof line yet!

          tom bosscher

Xmitters at aol.com wrote:
> Hello:
>
> We are about to embark in an STL experiment here at NIU.
>
> I have a 4 foot Anexter Mark grid dish that I want to place at the top of one 
> of our buildings here. Since it's temporary, I need something that I can sit 
> on the roof, not poke any holes,  that will hold the dish rigidly enough so 
> movement will not affect our RF signal level experiments. 
>
>