[BC] FCC Approves proposed AM MoM Rules

[Dana Puopolo]

Or get a few people out in the field with meters and cell phones and 'walk in'
the array. I've done this numerous times.

------ Original Message ------
Received: Sun, 28 Sep 2008 12:49:37 PM EDT
From: W2XJ <W2XJ at nyc.rr.com>


The best way to tune an array if you are doing it by FIM is to set ratio 
points. Drive stakes in a perimeter of 1 KM to 1 mile around the array 
every 10 degrees or so. Do an omni proof for those locations and then 
while tuning measure the ratio. Once those look good, run the necessary 
radials.