[BC] trouble with an old BC-1G need advice

[BOYDSIRBOYD at aol.com]

as per the owner it has always been there,, there are two other engineers  
who have worked on this thing in the past and they all say the same thing. i'm  
now at a loss as to what needs to be done.
 
bill
 
 
In a message dated 4/2/2008 11:30:30 A.M. Eastern Daylight Time,  
gglaenzer at hqradio.com writes:

if it is  running ~2600-2700 Ep at high power, your Ip is right on the money

as  is your output RF current reading, if into 50 ohms

but no way can those  power readings be correct, unless it is running at 153% 
 efficiency





**************Planning your summer road trip? Check out AOL Travel Guides.    
  (http://travel.aol.com/travel-guide/united-states?ncid=aoltrv00030000000016)