[BC] Where can I find.....

[Milton R. Holladay Jr.]

PL-259s, type Ns, and microphone stands have a 5/8 X 27 thread
M
----- Original Message ----- 
From: "Ronald J. Dot'o Sr." <ron.doto at comcast.net>
To: "Broadcasters' Mailing List" <broadcast at radiolists.net>
Sent: Wednesday, February 14, 2007 3:57 AM
Subject: Re: [BC] Where can I find.....


> Also, if you fabricate a PL-259 with the tip of the center conductor so
that
> the solder is recessed it will fit in a type N female.  The outer shell
> diameter and thread is the same...try it in an emergency :)
>
> Ron D
>
>
> ----- Original Message ----- 
> From: "Milton R. Holladay Jr." <miltron at mindspring.com>
> To: "Broadcasters' Mailing List" <broadcast at radiolists.net>
> Sent: Wednesday, February 14, 2007 00:37
> Subject: Re: [BC] Where can I find.....
>
>
> > In case you hadn't noticed, a type N male will fit right into a BNC
female
> > M
> > ----- Original Message ----- 
> > From: "Rick Levy" <rlevy at broadcastsignallab.com>
> > To: <broadcast at radiolists.net>
> > Sent: Tuesday, February 13, 2007 11:34 PM
> > Subject: [BC] Where can I find.....