[BC] Where can I find.....

[Ronald J. Dot'o Sr.]

Also, if you fabricate a PL-259 with the tip of the center conductor so that 
the solder is recessed it will fit in a type N female.  The outer shell 
diameter and thread is the same...try it in an emergency :)

Ron D


----- Original Message ----- 
From: "Milton R. Holladay Jr." <miltron at mindspring.com>
To: "Broadcasters' Mailing List" <broadcast at radiolists.net>
Sent: Wednesday, February 14, 2007 00:37
Subject: Re: [BC] Where can I find.....


> In case you hadn't noticed, a type N male will fit right into a BNC female
> M
> ----- Original Message ----- 
> From: "Rick Levy" <rlevy at broadcastsignallab.com>
> To: <broadcast at radiolists.net>
> Sent: Tuesday, February 13, 2007 11:34 PM
> Subject: [BC] Where can I find.....
>
>
>> Matt Howell wrote:
>> >>
>> Unless I am missing something, does a BNC not mate to a BNC? Or a type N
>> to a type N?<<
>>
>> I agree.  Same series.  In this case, presumably, a "large UHF" to a
> "large
>> UHF".
>>
>> >>You just need the male version as the bridge has the female version.<<
>>
>> That's where the problem is.  If I'm not mistaken, the UG- designation of
>> the male version would be different than that of the female version (the
>> UG-357/U).  At this point we lack a UG- or part number for the mating 
>> male
>> connector (plug), and a vendor source for same.  Can anybody here provide
>> that information?
>>
>>
>>
>> _______________________________________________
>>
>> The BROADCAST [BC] list is sponsored by SystemsStore On-Line Sales
>> Cable-Connectors-Blocks-Racks-Wire Management-Test Gear-Tools and More!
>> www.SystemsStore.com       Tel: 407-656-3719    Sales at SystemsStore.com
>>
>
> _______________________________________________
>
> The BROADCAST [BC] list is sponsored by SystemsStore On-Line Sales
> Cable-Connectors-Blocks-Racks-Wire Management-Test Gear-Tools and More!
> www.SystemsStore.com       Tel: 407-656-3719    Sales at SystemsStore.com
>