[BC] differences between Tek 2710 - 2711 - 2712

[Gary Glaenzer]

here's a link to the fact sheet that covers both 2711 and 2712

it looks like the 2712 is about 10 dB better on sensitivity, plus a lot
better on stability

http://www.metrictest.com/catalog/pdfs/product_pdfs/tek_2711.pdf

both are 50-ohm inputs

G


----- Original Message ----- 
From: "Mike Holderfield" <mikeholderfield at gmail.com>
To: "Broadcasters' Mailing List" <broadcast at radiolists.net>
Sent: Saturday, February 10, 2007 6:37 PM
Subject: Re: [BC] differences between Tek 2710 - 2711 - 2712


> The 2710 does not have 300Hz RBW in the standard model.
> It is an option. Option 01 IIRC.
> So if you buy a 2710 make sure it has that option.
> The only 2711 I have seen was 75 ohm input and was
> used at a cable head end. Not to say it won't work.
> The 2712....you're good to go.
>
> mike
>
> Gary Glaenzer wrote:
> > it appears they are similar, will they all do the NRSC measurement ?
> >
> >
> > _______________________________________________
> >
> > The BROADCAST [BC] list is sponsored by SystemsStore On-Line Sales
> > Cable-Connectors-Blocks-Racks-Wire Management-Test Gear-Tools and More!
> > www.SystemsStore.com       Tel: 407-656-3719    Sales at SystemsStore.com
> >
> >
> _______________________________________________
>
> The BROADCAST [BC] list is sponsored by SystemsStore On-Line Sales
> Cable-Connectors-Blocks-Racks-Wire Management-Test Gear-Tools and More!
> www.SystemsStore.com       Tel: 407-656-3719    Sales at SystemsStore.com
>
>