[BC] differences between Tek 2710 - 2711 - 2712

[Mike Holderfield]

The 2710 does not have 300Hz RBW in the standard model.
It is an option. Option 01 IIRC.
So if you buy a 2710 make sure it has that option.
The only 2711 I have seen was 75 ohm input and was
used at a cable head end. Not to say it won't work.
The 2712....you're good to go.

mike

Gary Glaenzer wrote:
> it appears they are similar, will they all do the NRSC measurement ?
> 
> 
> _______________________________________________
> 
> The BROADCAST [BC] list is sponsored by SystemsStore On-Line Sales
> Cable-Connectors-Blocks-Racks-Wire Management-Test Gear-Tools and More! 
> www.SystemsStore.com       Tel: 407-656-3719    Sales at SystemsStore.com
> 
>