[BC] New Jones Receiver

[Lane Lindstrom]

I was told by Jones that the relay common could be removed and changed to
isolated dry contacts. Not quite sure how that is done.

Lane
----- Original Message ----- 
From: "Chuck G. " <chuckg at chartermi.net>
To: "Broadcasters' Mailing List" <broadcast at radiolists.net>
Sent: Saturday, April 07, 2007 9:44 PM
Subject: Re: [BC] New Jones Receiver


> I'd have been happier if they hadn't tied all the output relay commons
> together.
> With certain automation systems there's now no way to disable the liners
> (by removing common ground) without also disabling the
> net spot record closures unless you wire up an outboard relay box. Or
> send the receiver back to Jones to have the relays separated.
>
>
>
> Chuck G.
>
>
>
>
> Dennis Cope wrote:
> >
> > One thing they did do right is the connecter for the relays, makes
changing
> > receivers
> > almost a joy.
> >
> > Dennis
> > WESR, WCTG
> >
> >
> >
> >
>
> _______________________________________________
>
> The BROADCAST [BC] list is sponsored by SystemsStore On-Line Sales
> Cable-Connectors-Blocks-Racks-Wire Management-Test Gear-Tools and More!
> www.SystemsStore.com       Tel: 407-656-3719    Sales at SystemsStore.com
>