[BC] Continental 50kw

[Robert Meuser]

The SN should not be important, but when you replace the scope make 
shure there are no phase errors. There were actually some units that 
left the factory with phase errors. In such instances tuning by the 
scope yielded incorrect results. Usually the plate should dip at the 
same time the eye is closing.

R


Don Niccum wrote:

>The oscilloscope in our Continental 317C2 just bit the big one.  Would
>anyone out there happen to have one that they might be willing to part with?
>Transmitter serial number is 238 if that is important for this part.
>
>Thanks!