[BC] Copperweld

[Golchert, Michael A.]

  Only major source that I'm aware of is Kintronic.  I'm certain that there are other sources.

Michael A. Golchert
AM Field Engineer
Clear Channel Radio
{on the road(again), via WebMail}



-----Original Message-----
From: broadcast-bounces at radiolists.net on behalf of Mike McCarthy
Sent: Fri 12/22/06 22:51
To: Broadcasters' Mailing List
Subject: [BC] Copperweld
 
Where do you find copperweld wire...both solid and stranded?  I'm 
going to need a couple thousand feet for a rather large skirt feed system soon.

MM

>   As one that has used copperweld in the air and under the ground (#6 awg)
>I can tell you:
>   The first time they go to cut it they will know it isn't copper.
>   (take a pair of household pliers and cut a piece of #10 copper and
>then a coat hanger, (#14 I would guess) you will see!
>   Copperweld is the answer and it is much cheaper than copper.
>--
>    Ron  KA4INM



_______________________________________________

The BROADCAST [BC] list is sponsored by SystemsStore On-Line Sales
Cable-Connectors-Blocks-Racks-Wire Management-Test Gear-Tools and More! 
www.SystemsStore.com       Tel: 407-656-3719    Sales at SystemsStore.com