[BC] serial printer assistance
Charles Ring
w3nu at roadrunner.com
Wed Jun 10 13:45:30 CDT 2009
Find an old Epson EX-800 or EX-1000 (wide carraige and thus bulky) on
eBay which has both parallel and serial inputs. It needs a special
plug for the serial input but I found one for each of the 2 I used
for EAS. i think I have the manual which covers the serial input. It
does a great job for this.
I was told (less than sure this is right) that the FCC does not
accept EASWATCH and the like in place of a printer.
Randy Moore wrote:
>Yes, you can verify that the serial ports work using a terminal program.
>
>Rather than pay the very high price for a replacement serial printer
>you can download the EASWATCH program from broadcast.net and use
>that on a computer with a serial cable to record all EAS messages
>received and activations sent.
>>
>>I have an eas serial printer that doesn't work after a lightning
>>strike. I don't have a second serial printer. How would I test
>>the serial output of the EAS unit to make sure it's just the
>>printer (which I've confirmed dead, no lights, etc) Could I check
>>it through a terminal program?
>>
>>Henry G. Royse, II
More information about the Broadcast
mailing list