[BC] serial printer assistance

[Hal Schardin]

Yes,
You could use a terminal program if you have appropriate cabling.
 
FYI, Jameco sells a serial to parallel converter, so any (old) parallel
printer could print from a serial source. 
Watch the line wrap:
http://www.jameco.com/webapp/wcs/stores/servlet/ProductDisplay?langId=-1&storeId=10001&catalogId=10001&productId=116935&
 
Hal Schardin, CPBE, CBNT
Minnesota Services for the Blind
651 642-0848
Hal.Schardin at STATE.MN.US 

>>> <wclu at glasgow-ky.com> 6/10/2009 11:03 AM >>>
I have an eas serial printer that doesn't work after a lightning 
strike.  I don't have a second serial printer.  How would I test the 
serial output of the EAS unit to make sure it's just the printer 
(which I've confirmed dead, no lights, etc) Could I check it through 
a terminal program?

Henry G. Royse, II
President
Royse Radio, Inc.
WCLU AM/FM-Glasgow, Kentucky
270.651.9149 <wclu at glasgow-ky.com>