[BC] Tieline Expert---

[towers at mre.com]

Two things...

First...is the IP enabled?  When you are at the top level dialing page,
the dialing display will show all the methods of connections.  POTS, IP1,
IP2, etc.  If IP1 and IP2 are not showing, the IP is not enabled and needs
to be turned on.

It's an option which must be bought seperate.  SHort term, they can give
you the demo code.  But once it's turned on, you have 45 days to use it
and that's it.  No more IP on that unit until the IP option is bought.

Second,  call Bill Miller at Tieline.  He's their tech guru.

They have a primer on the IP configuration on their web page.  Bill can
give you the URL.

MM



> Hi all...
> I think Kevin is the guy I'm looking for, here...
>
> I've received a Tieline rig that has to be set up - quick.
> A field unit with G3 card, and one with ethernet/pots etc.
>
> I've got DSL and T1 service available... the DSL is the best choice as I
> can
> have all the traffic off that network for duration of the remote if need
> be.
> (Not so on the T1)  I"ve seen folks brag they could even get good quality
> off a dial up on these things...
>
>   On my DSL router... I've got my static WAN IP, my routers LAN IP, I
> assign
> fixed IP's off this router for all the PC's, but leave the DHCP running...
> for discovery purposes, and for temporary hookups (like my guest laptop,
> etc.)  Assigning a fixed IP for the Tieline unit on the studio end should
> be
> no sweat... if I can get it to see the router...
>
> Ok, off we go.
>   I plug in the studio tieline (which is actually a second field unit) and
> proceed trying to find some way to get it to get an addy from the
> router...
> no luck.  I try looking for it in the router tables... no luck... I'm not
> seeing really what I'm looking for in the quick start guide or the online
> video...
>
>   I can hit a spot in the menus that tells me I can type in my IP... but
> can't actually get it to input any numbers.
>   Thought crosses my mind that the borrowed Cat6 jumper may be some sort
> of
> Xover...
>
>   I need to get this rig running asap Friday evening and set up for an
> autoconnect on Sat AM.  I can't physically be on site for the event...
>
> (I will have about a half hour Friday night to set up both the studio and
> field end -on G3- and prove it out. for a Saturday AM remote. which I will
> not be onsite to help with.)
>
>   !
> Any tips you can pass along will help immensely.
>
> Jason
>
>
>
>
>
> ~______________________________________________________________________~
> The Broadcast [BC] list is sponsored by www.SystemsStore.com
> Your Premium Supplier Of Components To Build and Maintain A Technical
> Infrastructure
> www.SystemsStore.com          Tel: 407-656-3719
> Sales at SystemsStore.com
>