[BC] Negative Peaks

[Tom Spencer]

Speaking of which -

Just how far off IS the carrier?  Far enough, and THAT might be the 
cause; the monitor is seeing the carrier offset (it shouldn't, but I've 
seen it happen; which is why my first mentor told me to always set the 
polarity switch to match the direction the frequency was off - positive 
if high, negative if low.)

HTH

Jim Tonne wrote:
> Chuck:
>
> If, when modulation occurs, the center frequency
> shifts as seen on an analog frequency monitor,
> then the problem is due to nonlinearity. 

-- 
Tom Spencer
PG-18-25453 (nee' P1-18-48841)
http://radioxtz.com/