[BC] IP address blocking

[Porter Allen]

Linksys default info. as follows:


UN:  admin
PW:  none...blank...leave it empty

IP for recent devices is 192.168.1.1 or 192.168.1.254.



 Allen Porter
Project Engineer
Office: 770.369.9663
Cell:    678.984.3577
 

 
One Convergent Center
190 Bluegrass Valley Pkwy
Alpharetta, GA 30005
770.369.9000
www.convergent.com
 

 
 

-----Original Message-----
From: broadcast-bounces at radiolists.net
[mailto:broadcast-bounces at radiolists.net] On Behalf Of Bruce Potterton
Sent: Friday, May 16, 2008 7:53 PM
To: Broadcasters' Mailing List
Subject: RE: [BC] IP address blocking

Check your ipconfig for the gateway IP, that will tell you what IP to
use to access your router.   When you get to the log on onscreen try
using:

User: admin
Password: admin

Those are the default username and password for most linksys routers.

If those don't work and you don't have any way to recover what they are,
reset the router to factory defaults and then use the default user and
PW above.  (note ALL router settings will be reset back to the factory
defaults)

After you get it set up the way you want it be sure to change the user
and password from the defaults and note the new info in a safe place for
future use.   IF you think the router is in a physically safe place you
could affix a label under the router with a hint as to the user and PW.

Bruce Potterton 

-----Original Message-----
From: broadcast-bounces at radiolists.net
[mailto:broadcast-bounces at radiolists.net] On Behalf Of Glen Kippel
Sent: Friday, May 16, 2008 4:12 PM
To: Broadcasters' Mailing List
Subject: Re: [BC] IP address blocking

On 5/16/08, Oradat, Chris <Chris.Oradat at disney.com> wrote:
>
> Unless you changed it, default setup IP is (usually) 192.168.1.1
>
> Chris Oradat
>
>
> ---------------


Well, 1.1 was the IP that Linksys gave me, and that doesn't connect.  I
was able to bring up the router setup main screen on my home computer by
using
192.168.0.1 but it said the user was admin and asked for a password,
which I don't have.  And I can ping 0.1 here at work but 1.1 times out
when I try to ping it.  Linksys did say that they have other default
setup IPs.  I cannot seem to access it on our server either.  I just
thought of plugging a laptop directly into the router to see if that
will gain access, but it looks like that may have to wait until next
week.
_______________________________________________

The BROADCAST [BC] list is sponsored by SystemsStore - Your Premium
Supplier Of Components To Build and Maintain A Technical Infrastructure
www.SystemsStore.com       Tel: 407-656-3719    Sales at SystemsStore.com

_______________________________________________

The BROADCAST [BC] list is sponsored by SystemsStore - Your Premium
Supplier Of Components To Build and Maintain A Technical Infrastructure
www.SystemsStore.com       Tel: 407-656-3719    Sales at SystemsStore.com