[BC] Simple Codec- Windows Media

[Steve Newman]

Mark...

Try Simplecast. It's not freeware but it's easy to configure. We're using it 
at one of the stations I consult. Works great for WMA streams. Sounds like 
just what you need.

Here's a link with screenshots etc.

http://www.spacialaudio.com/products/simplecast/

Hope this helps and hope it will work for you.

Steve Newman
Steve Walker Productions
Opp, AL  36467


----- Original Message ----- 
From: "Mark Earle" <mearle at mearle.com>
To: "Broadcasters' Mailing List" <broadcast at radiolists.net>
Sent: Tuesday, September 05, 2006 7:06 PM
Subject: [BC] Simple Codec- Windows Media


>I am on a quest for a simple streaming codec/ software.
>
> 1. Needs to run under Windows 2000, on a PC connected to internet via DSL.
> 2. Relatively low sample rate is OK (8-12k mono is fine, for instance)
> 3. Only ONE person needs to connect.
> 4. That person is running Windows and would prefer/ almost must use 
> Windows Media Player.
>
> This is sort of a listen line except over the internet. The plan is to put 
> the desired program source in to the sound card on the Windows 2000 PC. 
> Whenever the person connects, they get the audio. I can open ports as 
> needed at the encode end.
>
> Shoutcast, and Windows Media encoder, both have issues that prevent their 
> use in my situation.
>
> Thanks in advance.
>
> -- 
> mwe
>
>      ) )    ( (     ) )    You will be assimilated... oooh, coffee!!
>   _|****|   ( |    |   KLTG KOUL KLHB KMJR
>   `|____|   mearle at mearle.com