[BC] WE Field Engineering
DANA PUOPOLO
dpuopolo
Fri Oct 14 23:52:16 CDT 2005
Yep...
because the DC was sent at a decent current too as it also has to power the
filaments in all those tubes
-D
------ Original Message ------
Received: Fri, 14 Oct 2005 09:38:53 PM PDT
From: RLO2L at aol.com
To: broadcast at radiolists.net
Subject: Re: [BC] WE Field Engineering
In a message dated 10/14/2005 7:26:58 P.M. Central Daylight Time, dpuopolo at u
sa.net writes:
Yep..
and they used to run several KV of DC on those coaxes to power those
undersea
amplifiers.
Not only the under-sea cables but the L3 and L4 coaxial cables. Talk about
sparks and spitzens when the contractor nailed a coax with 3,800 volts AC
between the center conductor and the shield with his back hoe!
Russel L. O'Toole, P.C.
R&M Consulting
31 Ponderosa Drive
Romeoville, Illinois 60446
815-372-1990 voice
630-699-2965 cell
815-886-9232 fax
KD5OAE General
_______________________________________________
This is the BROADCAST mailing list
To send to the list, email: broadcast at radiolists.net
For sub changes, archives and info on this other lists:
http://www.radiolists.net/
More information about the Broadcast
mailing list