[Tech-Assist] STL problem now critical

[Cowboy]

On Tuesday 27 March 2012 09:23:46 pm Jerry Mathis wrote:
> OK, here's an update, and an urgent request for some knowledge and suggestions.

> I'll update everyone with what I find out. In the meantime, PLEASE comment if you have pertinent knowledge or information.

 Milton, Mike, Lyle, and I are pretty much all on the same page.

 Carry a meter especially, and a load to the top at both RX and TX sites.
 While measuring line loss and such, have the climber call down
 the part numbers of the installed assembly.

 The climber should drag a tag with him, in case you find the wrong
 feed by part number, so he can change it and re-measure while
 still in position.


-- 
Cowboy