[EAS] RWT runs everyhour after put it on-line

[Marlin Jackson]

On the config tab in the EndecsetD program. Look in the "Override Input (D in Use)" box. If that is set to RWT and the active closed or open is incorrect that could be a problem. Usually that should be set to "None" unless your using the D1 input for a hold off controlled by your automation. It's not explained much in the manual.
 
Good Luck,

 
Marlin Jackson, CSTE
Assistant Chief Engineer,
RF Systems
KXLY Broadcast Group
500 W Boone
Spokane, WA 99201
marlinj at kxly.com
509-329-4908
 
>>> "Sun, Ling-Ling" <sun.86 at osu.edu> 6/27/2012 2:14 PM >>>
I put my SAGE ENDEC on-line this afternoon. timed RWT is setup run randomly but in last two hours the RWT run everyhour. I turn the timed RWT from random to off to see if it runs again at next hour. What could be wrong?

Thanks,

Ling Ling Sun

_______________________________________________
This is the EAS Forum Discussion List

Please invite your friends to join our Forum!
http://lists.radiolists.net/mailman/listinfo/eas

And, remember the main page: http://eas.radiolists.net