[EAS] Version 89 - required?

[Harold Price]

Jim,

CAP status: Offline will show up if any of the cap server definitions is down.

Do you have more servers than just the IPAWS server defined?  Check 
the CAP tab on ENDECSetD.

If will also show up if enough polls are missed in a five minute interval.

Check the CAP stats button shows on the Tools page of the ENDES's web page.
If you have only the IPAWS server, you should see something like this:

The IPAWS poller is Up

IPAWS is Up, 6145 good polls, 28 failed polls, 18 alerts, 9 skipped, 
9 accepted.

If you have a bad server entry, you may see something like this:

The IPAWS  poller is Up
The Type 1 poller is Down

IPAWS is Up, 6145 good polls, 28 failed polls, 18 alerts, 9 skipped, 
9 accepted.
myipaws is down, 0 good polls, 6140 failed polls, 0 alerts, 0 
skipped, 0 accepted.

You can also check the individual poller stats by clicking the other 
buttons under the Stats heading:

IPAWS Status at Fri Jun 15 09:36:51 2012,  13:36:51 2012 (UTC)
ipaws
     6176 polls, 6148 successes, 28 failed, 0 abnormal, 18 polls 
contained new alerts,
     37 feed polls, 37 feed successes, 0 feed failed, 0 feed abnormal,
     18 new alerts, 9 not state, 0 SPS ignored
     9 alert fetches, 9 successes, 0 failed,  0 abnormal,  9 active alerts.
     0 bad signature, 0 can't verify signature, 0 not signed
     9 processed, 0 skipped, 0 cancels
     Startup at            : 2 days, 8 hours ago, Wed Jun 13 01:31:05 2012
     Last successful poll  : 0 minutes ago, Fri Jun 15 09:36:50 2012
     Last failed poll      : 20 hours, 13 minutes ago, Thu Jun 14 13:23:46 2012
     Last prefiltered alert: 16 hours, 30 minutes ago, Thu Jun 14 17:05:55 2012

Of interest are the times at the bottom.
Note that these stats are cleared to zero on a reboot.

Finally, the WGET logs will show you the error message resulting from 
polling the various servers.  It does not show the passwords, but you 
can see what host you are connecting to, and what error it got trying 
to connect.

You can send us your settings file, and you can cut and paste the 
info from the items discussed above, and we can take a 
look.  support at sagealertingsystems.com

Harold

At 08:43 AM 6/15/2012, Keen, James M wrote:
>I have installed v89 but the unit still says "CAP Status: Offline" 
>but I am getting the tests they are sending????
>
>Jim Keen
>WBAA
>Purdue University
>West Lafayette, IN
>
>_______________________________________________
>This is the EAS Forum Discussion List
>
>Please invite your friends to join our Forum!
>http://lists.radiolists.net/mailman/listinfo/eas
>
>And, remember the main page: http://eas.radiolists.net