[EAS] RWT trigger detection
Marcos O'Rourke
m.orourke at kwve.com
Thu Jul 5 19:15:26 CDT 2012
There's no internal mechanism to activate a relay based on DTMF.
The way we are doing it with our stations is that our automation system sends out a relay closure that is scheduled by traffic so all our stations do an RWT at the same time.
--
Marcos O'Rourke, CBRE, CBNT
Engineering
K-Wave_Radio_Network
Chair
Orange_County_EAS_LECC
On Thu, Jul 5, 2012 at 4:53 PM, Mike McCarthy <towers at mre.com> wrote:
>I don't think I made my question very clear. I know the Sage can take a
>remote closure. We're doing that now, but manually. My question is the
>viability to have the box itself decode a two-tone or DTMF string (as an
>exmaple) and react accordingly so we can 1)Traffic/automate the RWT
>completely and include remote locations in a unified hands-off fully
>automated RWT. This way we can traffic RWT's when our TOC is not manned
>over night and one some weekends/holidays. And 2) Run a unified RMT relay
>at a time of our choosing for the area.
>I know I can do this with external DTMF boxes closing the logic input(s).
>But it begs the question about whether it can be done internally with
>nothing more than an audio jumper to say input #6 and some firmware code
>saving us $xxx per DTMF decoder. Much the same as they do with weather on
>input #3 detecting the 1050 tone and the others detecting the old EBS
>tones.
>MM
>> I'm sorry, let me rephrase... You can send a contact closure, and the Sage
>> box will send an RWT. For example, if you are delivering via satellite,
>> you can wire a relay out of your receiver to the specified relay input on
>> the Sage and it'll send an RWT.
>>
>> --
>> Marcos O'Rourke, CBRE, CBNT
>> Engineering
>> K-Wave_Radio_Network
>>
>> Chair
>> Orange_County_EAS_LECC
>>
>_______________________________________________
>This is the EAS Forum Discussion List
>Please invite your friends to join our Forum!
>http://lists.radiolists.net/mailman/listinfo/eas
>And, remember the main page: http://eas.radiolists.net
If the recipient of this message is not the intended recipient or agent responsible for delivering the message to the intended recipient, you are hereby notified that any dissemination or copying of this communication is restricted. If you have received this electronic transmission in error, please delete it from your system without copying it, and notify the sender by reply email.
More information about the EAS
mailing list