[EAS] configuring new sage box

[Ken Freeman]

Thanks,
That helps a lot.

Ken

On Sun, Oct 30, 2011 at 6:21 AM, Tom Taggart <tpt at literock93r.com> wrote:
>Well, not really.  The geeks may get it instantly, but for
>us luddites there's a learning curve. You will quickly find
>that you will want to do all the set-up over your local
>network. First thing to do is --on the front panel of the
>Sage, go down to network and write down the IP address (the
>password is 1-1-1-1). Then in the same area find the command
>to turn network server on so you can communicate with the
>box.