[BC] Odd request....

[RichardBJohnson at comcast.net]

Use a filament transformer with a 10A secondary. Put that secondary in series with your load and terminate the transformer primary with whatever resistor that will give you the required output voltage. Convert to DC with a rectifier and capacitor.

Cheers,
Richard B. Johnson
Book: http://www.AbominableFirebug.com/

----- Original Message -----
From: "Cowboy" <curt at cwf1.com>

 Who knows ?

 I have use for "a device" commonly known as a current transformer,
 but I need it to output around 100V at it's terminals ( +/- ) for a
 current sample around 10 amps. 60hz