[BC] am receiver for monitoring at a 20 KW site.

[Glen Kippel]

On Tue, Jun 5, 2012 at 8:24 PM, Mike McCarthy <towers at mre.com> wrote:
 
><SNIP>
 
>If that doesn't work, the 2nd effort will likely involve using some
>canceling method employing another loop or "long wire" where the 2nd
>antennal would be the undesired signal source and it too would be notched,
>but on the desired side so we get a very clean mix between the two
>signals.

>Yes...we have some serious work ahead of us....

>------------------
 
For phasing, an MFJ 1026 phasing unit might work, as long as it doesn't absorb too much RF through its cabinet.  Timewave and DX Engineering also make phasing units, but I believe they cost more.  It is, of course, possible to make one...