[BC] am receiver for monitoring at a 20 KW site.

[Glen Kippel]

On Fri, Jun 1, 2012 at 11:55 AM, Lotus Engineering <loteng at lvradio.com> wrote:
>Can anyone recommend a reasonably priced AM receiver that can set at a 20 KW AM site and monitor a 5 KW AM station about 1.5 miles away without having a lot of bleed through?  The 20 goes to 2 at night and the 5 goes to .5 at night and I have no problem with consumer grade receivers at night, but daytime is a pain.  I'm going to try feeding the 20KW signal out of phase to the bleed through in the 5 KW stations receiver to see if I can cancel it, but a better receiver would make life easier.
 
-------------------
 
I have a Collins R-388/URR, alias 51J-3 here that I don't use any more.  I'm sure it would be RF-proof.  Want to make an offer on it?  The idea of using a tuned loop is a good one, also.  
 
You didn't mention what frequencies are involved.  That would have some bearing on things.