[BC] am receiver for monitoring at a 20 KW site.

[radioranger]

You don't mention the frequency spacing, but if it's enough, a simple LC
series 'wave trap' tuned to the undesired frequency in shunt with the
antenna connection might do the trick.  I used this trick with a Burk EAS
receiver at a 1310kHz AM site to monitor an 830 kHz signal 50 miles away,
and it did the trick.

Steve Brown
Radio Rangers
Minneapolis

>>-----Original Message-----
>> [mailto:broadcast-
>>bounces at radiolists.net] From: Lotus Engineering
>>
>>Can anyone recommend a reasonably priced AM receiver that can set at a 20
>>KW AM site and monitor a 5 KW AM station about 1.5 miles away without
>>having a lot of bleed through?