[BC] Negative Current Sample

[Dave Hultsman]

Wayne:
 
See  www.plussine.com    Software for programming the Sine Systems RFC-1B   Also an add on Board to the RFC-1B that adds a computer gui to interface to the transmission system.
 
Developed by Olen Booth  of IntrinsicNet, Starkville, MS.
 
In a message dated 2/29/2012 10:10:47 A.M. Central Standard Time, woollard at inreach.com writes:
>Has anybody come up with software that is relatively inexpensive that will
>allow compiling data and allow control of individual Sine systems sites ?
>WW
>----- Original Message -----
>From: "Dave Dybas" <dd92251 at aol.com>
>> The Lynx software allows you to configure each Meter Input to read either
>> a
>> (+ 0 to +10 Volt)input or (-5 to +5 Volt)input.  So you can read a
>> negative
>> voltage if your GSC3000 is configured for it.
>>
>> Dave Dybas