[BC] Digital STL

[Chuck Lakaytis]

We had the following issue with some Moseley Starlinks some time ago. I 
believe the problem has been fixed by Moseley and newer units should 
work ok.

http://support.broadcast.harris.com/eservice_enu/start.swe?SWECmd=Login&SWEPL=1&SWETS=1266861218506

You may have to register to get to the above link.

The Starlink as originally unmodified set  a AES as "data" and also set 
a "digital preemphasis" bit.  This will keep some AES input exciters and 
processors from working.  The tech bulletin explains how to lift two 
pins on an IC to take care of the  problem.

Better have a magnifier handy!

Kevin Trueblood wrote:
> I seem to recall hearing of a very, very similar problem with a station here in Madison.  Orban and Moseley took turns blaming each other.  I believe the problem ended up being in the STL, but I don't recall the exact fix.
>
> Kevin
>
>   
>> If you intend to use AES/EBU digital audio on the output end, be careful.
>> I'm working on a problem at the moment with a Moseley DSP6000D.  The AES/EBU
>> audio is not detected by either the Orban 8400 or Titus 3-DRX units.  
>>     
>
>
>   

--
Chuck Lakaytis
Director of Engineering, Alaska Public Broadcasting
135 Cordova Street, Anchorage, AK 99501
office   907-277-6300