[BC] miswiring adventures

[Chuck Lakaytis]

These were fabricated square ones that I installed years ago.  Two years 
ago I wanted one for 3 in. coax and talked with Terry Crouse at Nautel 
and perhaps Jeff Welton.  They could faintly remember such a ferrite, 
but nobody at Nautel could source one.  I found one at Surplus Sales of 
Nebraska.

I wish I could find the assembled square ones because you could take it 
apart and install it on a coax with connector already installed.  I will 
try and find a picture of the toroid.

Chuck Leavens wrote:
> I could NEVER FIND a ferrite toroid that big.  Nautel did not supply one although they supplied many smaller ones.
>
> My searches never came up with one that would go over a piece of Andrew 3" flex.
>
> On Feb 3, 2010, at 2:37 PM, Chuck Lakaytis wrote:
>
>   
>>   Or remembered that you wanted to slide a big ferrite toroid on 
>> the 3 1/8 inch coaxial cable before installing the connector.  (Nautel 
>> users will have probably done this)
>>
>>     
>
> Chuck Leavens
> Dir. of Engineering and I.T.
> WDUQ Pittsburgh Public Radio
> Pittsburgh PA 15219
> 412-396-5508
>
>
>   

--
Chuck Lakaytis
Director of Engineering, Alaska Public Broadcasting
135 Cordova Street, Anchorage, AK 99501
office   907-277-6300