[BC] BE tuner and such

[Dana Puopolo]

That is a valid way to pre-tune a network. Put a 50 + j0 load on its input and
measure it's output (tower side). Adjust the network for the CONJUGATE value
(if the tower bridged 
30+j24, you adjust the network for 30 MINUS j24).

-D

On Monday 23 March 2009 08:04 pm, Ronald J. Dot'o Sr. wrote:

>   I wonder if reading backwards from the ATU end of 
>  the coax through the switch to the TX output would tell me anything,