[BC] SRPT 30

[Phil Langston]

You may be thinking of the SRPT-40A which is the newest one or the older 
SRPT-40 or 40E. These are frequency agile. The SRPT-30 was the replacement 
for the older  crystal controlled units like the RPT-2, 15 and 30 which 
could be switched between two frequencies. The newer SRPT-40A and the 
SRPT-30 use the same basic synthesizer, but in the 40A the frequency is 
controlled by a bank of thumbwheel switches on the front panel  and on the 
30 there is an F1/F2 switch,

Phil Langston

----- Original Message ----- 
From: "Wooten, Charles" <charliewooten at clearchannel.com>


I have several SRPT-30s and they are channelized...they don't require any 
programming....I don't understand what you are meaning by "can't be 
programmed from the field" ....

Charlie

________________________________

From: broadcast-bounces at radiolists.net on behalf of Phil Langston



The SRPT-30's can't be reprogrammed in the field. Programming them at BE
requires a rather elaborate custom-built programming fixture. When I was
there, plans were in the works for some sort of field programming option  at
one time, but I don't know if they are still pursuing this.
The good news is one it's back in Quincy,the programming is something that
can be done pretty fast.

Phil Langston

.
----- Original Message -----
From: "patrick roberts" <radiowavesokc at gmail.com>


> Apparently Marti SRPT 30 units have to be programmed opposed to using
> crystals.  Is there a way for me to program it myself?  Is there anyone
> other than BE themselves that can program it?
>
>








--------------------------------------------------------------------------------


>
>