[BC] Marti RPT-30 Issue

[JD Davis]

Check the internal connection. I've had those center pins snap off the
little board they are soldered to. Give it a good coat of some new
solder.
On Mon, 2008-04-21 at 09:21 -0400, wkbx at k-bay106.com wrote:
> Anyone with experience with RPT-30 in a situation where the "Antenna" 
> fault lamp is flashing even when connected to a known good (tested on 
> another RPT-30 unit) cable and antenna? Any theories would be appreciated.
> 
> James Steele
> WKBX-FM
> 
> 
> _______________________________________________
> 
> The BROADCAST [BC] list is sponsored by SystemsStore - Your Premium
> Supplier Of Components To Build and Maintain A Technical Infrastructure
> www.SystemsStore.com       Tel: 407-656-3719    Sales at SystemsStore.com
> 
James .JD. Davis
Chief Engineer
Results Radio, Chico/Yuba City